Loading...
Home 2018-01-06T09:45:50+00:00

We fabricate, build and install conveyors for food and beverage plants.

Get a free quote

Food and Beverage Conveyor Specialists

Shan-Co has been designing and building food processing plants for more the 25 years. Our shop personnel and our installation technicians are second to none. Ron Shan has been installing food/water plants for more than 40 years.

We are Millwrights enabling SHAN-CO to install all the heavy machinery along with our outstanding line conveyors allows SHAN-CO to install and build your entire plant, from design, build and installation we do it all.

We are dealers for ACSI (Automated conveyor systems, Inc.) to meet all your roller conveyor needs. Shan-Co is also a dealer for CableVey to move dry goods cleanly and rapidly. Shan-co can also install your CableVey and roller conveyor.

0yrs
PLUS YEARS INDUSTRY EXPERIENCE
0
PLUS COMPLETED INSTALLATIONS
0
DEDICATED EMPLOYEES

Cablevey Cable Conveyors

ShanCo uses and installs Cablevey Cable Conveyors.

2″ Cable Conveyors

Our 2″ diameter cable conveyors are typically used to move small grains, seed and feed. Coffee chaff, carrot seed, chia seed, flax seed and other small items work well with this conveyor size and capacity. Also, both ground coffee and soluble coffee, soluble coffee combinations (3-in-1) have been conveyed successfully with cable conveyors of this diameter.

System Capacity:

  • 2″ (50.8mm) tube diameter
  • Moves up to 75 Ft³ (2.12 M³) / hour
  • Moves up to 3,000 pounds/hour (depending on bulk density of materials)

4″ Cable Conveyors

Our 4″ diameter cable conveyors are commonly used to convey brown-skin almonds, whole bean roasted coffee and a variety of breakfast cereals from flakes to rice puffs. These cable conveyors are the go-to conveyor workhorse systems for most applications. Cable conveyor cleaning includes dry and wet options. Clean-in-place is also an option used by many food processors today.

System Capacity:

  • 4″ (101.6mm) tube diameter
  • Moves up to 525 Ft³ (14.87 M³) / hour
  • Moves up to 22,000 pounds/hour (depending on bulk density of materials)

6″ Cable Conveyors

Our 6″ diameter cable conveyors are commonly used to convey breakfast flakes, rice puffs, in-shell walnuts, almonds, pistachios, whole bean roasted coffee and high-density powders and resins. These conveyors have both dry and wet cleaning options. Clean-in-place is also an option used by many food processors today.

System Capacity:

  • 6″ (152.4mm) tube diameter
  • Moves up to 1240 Ft³ (35.4 M³) / hour
  • Moves up to 45,000 pounds/hour (depending on bulk density of materials)

Marine Products

From premium furniture-grade plastic lumber to tougher-than-steel-and-concrete reinforced plastic lumber, we’re helping you make the world a safer, more stable, more beautiful place. We’re distributors for plastic boards.

Tough in the Extreme

SeaPile® and SeaTimber® revolutionize marine structures. Build your marine project with our indestructible lumber. Nothing challenges building materials like marine use—ports, wharves, piers, piles, fenders and more. Our SeaPile®, SeaTimber® and SeaCamel® products dominate this highly technical market. Bedford Technology marine products have single-handedly changed the market, letting you build marine infrastructure that withstands endless abuse by nature and man.

Features

  • Non-degrading and environmentally friendly

  • Resists marine borers

  • Industry-leading impact resistance and energy absorption

  • Not affected by extreme marine environments

  • Not affected by temperature change

  • Not affected by salt water

  • Resistant to ultraviolet light

Uses

  • Dock and pier fender systems

  • Bridge pier fender systems

  • Camels

  • Backing beams/wharf logs

  • Navigation aids and markers

  • Guide walls

  • Structural/retaining walls

  • Locks and more

Our Customers Say

“Working with Shan-Co has been a great experience.”

“Ron and Steve did a great job doing our installation..”

Our Equipment

Shan-Co offers a broad range of conveyor systems and fabricated products to suit your company’s needs.

FOM2 3015 NT Laser

The FOM2 3015 NT laser represents the third generation of AMADA’s proven FO series that was introduced in 1999. The FOM2 3015 NT combines features available on the FO series of lasers as well as some of the leading-edge technology available on AMADA’s F1 linear drive systems. Equipped with a solid-cast frame, water assisted cutting, and a high-precision motion system.

HDS 1303 Press Brake

With models varying in capacity from 88-243 tons, Amada’s HD NT press brake series can handle a full range of applications in bend lengths from 101 to 161 inches. The HD Series features a Hybrid Drive System that is engineered for high-precision bending repeat-ability, low energy consumption, and less maintenance than a conventional hydraulic press brake.

FP-2560 Metal Sander

Finish Pro Model FP-2560. Standard Features. Motorized Table Lift. Variable Speed Conveyor. Conveyor Forward & Reverse. Belt Safety Overtravel Switches. Electronic Eye Belt Tracking. 4-Jackscrew Table Support. Double Infeed & Outfeed Pinch Rolls. Conveyor Belt Tracking System. Safety System with Disc Brake.

Multi-Cam MG-204

The machine is a CNC Router. It is used for precisely cutting different types of material such as wood, acrylic, plastics, MDF, and various metals. Industries like wood workers, sign makers, and manufacturing facilities utilizes our machines. In short, it’s technically the opposite of a 3D printer. While a 3D printer is an additive manufacturing a CNC Router is a subtractive.

Multi-Cam MG

The machine is a CNC Router. It is used for precisely cutting different types of material such as wood, acrylic, plastics, MDF, and various metals. Industries like wood workers, sign makers, and manufacturing facilities utilizes our machines. In short, it’s technically the opposite of a 3D printer. While a 3D printer is an additive manufacturing a CNC Router is a subtractive.

OMAX 80160 Abrasive Waterjet

The OMAX 80160 abrasive waterjet cuts complex flat parts out of virtually any material, including metal, composites, stone, ceramic, glass, and plastic, with no heat-affected zone. Parts are cut with smooth edges, so there’s typically no need for secondary finishing operations.

The Omega

The Omega offers semi-automatic operation of the cutting cycle complete with hydraulic clamping, positive hydraulic cutting pressure and auto return after the cutting cycle.

QC11Y-6 Guillotine Shear

Guillotine shear with adjustable rake angle to achieve great cutting results; rake angle displayed by SIKO readout; simple operation.

Our Clients

Shan-Co works with companies throughout the food and beverage industry. Below are just a few of our clients.

Custom Conveyor Solutions

Shan-Co has the extensive experience to design, build and install a custom conveyor solution to satisfy your company’s needs. Talk to us today.

GET A FREE QUOTE

We welcome your request.

Need a Quote? – We’re Here To Help.

Please provide the information below and we will respond as quickly as possible. Thank you.